MK75076 CARBON FRAME

Product characteristics:
1. Four side plates are bonded together by 10MM carbon tubes, and the overall rigidity is improved obviously.
2. When bonding, special fixture is used to prevent distortion during forming and ensure the verticality and smoothness of the three bearing seats of the spindle (each set of side plates has been tested by installing bearing seats and spindles).
3. Side plates are made of pure Japanese imported Toray carbon fibers. The rigidity of the plates is much better than that of domestic carbon fibers.
4. The screw and support pillar at the joint of inner and outer plates are replaced by carbon tubes, which can effectively enhance the overall torsion resistance and reduce the weight!
5. Optimize the space of the battery storage and the location of the installation board of the front equipment.